Every outdoor sign in Panama City is governed by the municipality’s sign ordinance, which sets how large a sign may be, how tall it may stand, how far it must sit from the property line, whether it may be illuminated, and which sign types are permitted in each zoning district. This page summarizes those requirements in plain language and links each value back to the section of the Panama City code it came from.
Sign rules here are layered. The base zoning district — commercial, industrial, or residential — sets the default limits, and overlay districts such as historic or downtown districts can tighten them further. Because the most specific jurisdiction controls, a freestanding monument sign on a commercial parcel and a wall sign in a historic overlay can face very different limits even on the same street in Panama City.
Use the figures below as a fast first check, then run a full address lookup to confirm the exact limits for a specific parcel in Panama City, Florida. The full report also covers permit requirements, prohibited sign types, and illumination rules — each cited to the source ordinance so your permit application can reference it directly.
Before you order or install a sign in Panama City, confirm three things: the maximum sign area and height allowed in the parcel’s zoning district, the minimum setback from the right-of-way, and whether the sign type you want — freestanding, monument, wall, projecting, or awning — is permitted there at all. Many permit denials come from missing a setback or an overlay-district restriction rather than from the size of the sign itself, so checking the governing section before applying saves a costly resubmittal.
Advertisement
Advertisement
Max ground sign height
Monument: Not specified; Pylon: 50 ft
Ground sign setback
Monument: 5 ft from right-of-way; Pylon: 5 ft from right-of-way
Awning Signs
Awning Sign Sf Calc
Copy only
Building Signs
Building Sign Formula
Max area per face: 125 sq ft; Back-to-back faces: 250 sq ft
Building Sign Max Number
One per building side; Multiple permitted if 6 sq ft or less
A master sign plan is intended to promote consistency among signs within a development and enhance the compatibility of signs within the architectural and site design features of the development.
Nonconforming Status Of On Premises Signs Definition
Any on-premises sign which existed and was maintained in good order on the effective date of this Unified Land Development Code, and which does not conform to the provisions of this chapter is declared nonconforming.
two square feet per face or four total square feet, if back-to-back faces are used
General Info
Jurisdiction Name
Panama City, FL
Advertisement
Advertisement
General Standards
Abandoned Sign Removal
off-premises signs: Abandoned or dilapidated off-premises signs shall become illegal and be removed, reducing the total number of off-premises signs by one
Digital Billboard Space Exchange
new digital off-premises billboard signs: For every 1 sq ft of new space permitted, 3 sq ft of traditional billboard space must be removed