Understanding sign regulations in Madeira Beach, FL
Every outdoor sign in Madeira Beach is governed by the municipality’s sign ordinance, which sets how large a sign may be, how tall it may stand, how far it must sit from the property line, whether it may be illuminated, and which sign types are permitted in each zoning district. This page summarizes those requirements in plain language and links each value back to the section of the Madeira Beach code it came from.
Sign rules here are layered. The base zoning district — commercial, industrial, or residential — sets the default limits, and overlay districts such as historic or downtown districts can tighten them further. Because the most specific jurisdiction controls, a freestanding monument sign on a commercial parcel and a wall sign in a historic overlay can face very different limits even on the same street in Madeira Beach.
Use the figures below as a fast first check, then run a full address lookup to confirm the exact limits for a specific parcel in Madeira Beach, Florida. The full report also covers permit requirements, prohibited sign types, and illumination rules — each cited to the source ordinance so your permit application can reference it directly.
Before you order or install a sign in Madeira Beach, confirm three things: the maximum sign area and height allowed in the parcel’s zoning district, the minimum setback from the right-of-way, and whether the sign type you want — freestanding, monument, wall, projecting, or awning — is permitted there at all. Many permit denials come from missing a setback or an overlay-district restriction rather than from the size of the sign itself, so checking the governing section before applying saves a costly resubmittal.
Advertisement
Advertisement
Max ground sign height
Monument: 8 ft; Pylon: 25 ft
Ground sign setback
15 feet from right-of-way lines; 30 feet from right-of-way intersections
Awning Signs
Awning Sign Sf Calc
Copy only
Awning Projection Clearance
Affixed flat to the awning; no extension beyond the awning limits
Building Signs
Building Sign Formula
Sign area does not include framework, bracing, fence or wall supporting the sign
Home Sign Max Area
where local business tax receipt issued: One nonlighted flat mounted wall or window sign not exceeding two square feet in area shall be permitted on the street front of the principal structure if a local business tax receipt has been issued for that structure
Up to four directional signs per site provided that each sign does not exceed four square feet in area
General Info
Jurisdiction Name
Madeira Beach, FL
General Standards
Grandfathered Sign Conformity
grandfathered nonconforming signs: Grandfathered nonconforming signs shall be eliminated or made to conform with the requirements of this chapter when any proposed change, repair, or maintenance would constitute an expense of more than 25 percent of the original value or replacement value of the sign, whichever is greater
Grandfathered Sign Redevelopment Conformity
grandfathered nonconforming signs: A building or site, which is improved or redeveloped at a cost in excess of 50 percent of the assessed value of the existing building or site shall require any grandfathered nonconforming sign which is located on or is part of such building or site to conform to these regulations
Permitted Statutory Notice Warning Signs
in full report
Sign Area Computation
in full report
Severability Of Prohibitions On Billboards Requirement
in full report
Severability Of Provisions Pertaining To Prohibiting Sign Requirement