Every outdoor sign in Fellsmere is governed by the municipality’s sign ordinance, which sets how large a sign may be, how tall it may stand, how far it must sit from the property line, whether it may be illuminated, and which sign types are permitted in each zoning district. This page summarizes those requirements in plain language and links each value back to the section of the Fellsmere code it came from.
Sign rules here are layered. The base zoning district — commercial, industrial, or residential — sets the default limits, and overlay districts such as historic or downtown districts can tighten them further. Because the most specific jurisdiction controls, a freestanding monument sign on a commercial parcel and a wall sign in a historic overlay can face very different limits even on the same street in Fellsmere.
Use the figures below as a fast first check, then run a full address lookup to confirm the exact limits for a specific parcel in Fellsmere, Florida. The full report also covers permit requirements, prohibited sign types, and illumination rules — each cited to the source ordinance so your permit application can reference it directly.
Before you order or install a sign in Fellsmere, confirm three things: the maximum sign area and height allowed in the parcel’s zoning district, the minimum setback from the right-of-way, and whether the sign type you want — freestanding, monument, wall, projecting, or awning — is permitted there at all. Many permit denials come from missing a setback or an overlay-district restriction rather than from the size of the sign itself, so checking the governing section before applying saves a costly resubmittal.
Advertisement
Advertisement
Max ground sign height
8 ft max height
Ground sign setback
Monument/freestanding signs: 2.5 ft setback under 20,000 sq ft lot area; 5 ft at least 20,000 sq ft but less than 40,000 sq ft; 7.5 ft at least 40,000 sq ft but less than 75,000 sq ft; 10 ft at least 75,000 sq ft. The setback is measured from the nearest protrusion of the sign, sign foundation, or sign face to the property line.
Awning Signs
Awning Projection Clearance
Instead of a wall sign or a projecting sign, each separate establishment may have one canopy sign which hangs from a horizontal surface, such as a canopy, awning, or marquee, as long as the sign is no larger than six square feet and maintains a minimum clearance of nine feet from the bottom of the sign to the finished grade.
Canopy Sign Clearance Requirement
Instead of a wall sign or a projecting sign, each separate establishment may have one canopy sign which hangs from a horizontal surface, such as a canopy, awning, or marquee, as long as the sign is no larger than six square feet and maintains a minimum clearance of nine feet from the bottom of the sign to the finished grade.
Building Signs
Building Sign Formula
The aggregate square-footage of surface area of all wall signs on such building side shall not exceed the linear footage of the building side.
Building Sign Illumination
Only permanent signs may be illuminated; non-internally illuminated lighting must be shielded and directed to avoid glare, and neon is prohibited.
Definitions
Sign Area Definition
the surface areas in square feet within any regular or irregular geometric figure or combination of figures encompassing all parts of a sign, including the outer extremities of all letters, figures, characters, background, frame, trim molding, but excluding structural supports, whether they be columns, pylons, or a building or part thereof, unless the sign is printed directly on the wall of a structure.
Electrical Structural
Design And Construction Requirement
Design and construction: The design, construction and erection of all signs allowed within the city shall conform to the requirements of the Florida Building Code, and signs containing components to be connected to an electrical energy source shall also conform to the requirements of the National Electrical Code.
General Standards
Max Signs Per Lot
lots between 40,000 and 75,000 sq ft: Properties with more than one freestanding sign, with a lot area of at least 40,000 square feet, but less than 75,000 square feet, must have a minimum spacing of 75 feet to any other permanent sign
Nonconforming Sign Removal Criteria
nonconforming signs: Nonconforming sign must be removed or brought into conformity when substantially damaged, destroyed, or when property is redeveloped
Nonconforming Sign Repair Threshold
in full report
Election Sign Allowance
in full report
Free Expression Sign Allowance
in full report
Nameplate Or Occupant Identification Sign Allowance
in full report
Severability Of Prohibition On Billboards Requirement
in full report
Street Address Signs And Residential Mailboxes Allowance
Temporary window signs: For each parcel within the city, one or more temporary window signs may be displayed on the inside of the window.
Window Sign Allowable Area
Residential: 3 sq ft aggregate; nonresidential: 16 sq ft aggregate; no more than 35 percent of any window surface.
Zoning
Flags Allowance
Flags; zones residential: For each detached dwelling unit in a residential district, two flags not greater than 15 square feet in sign area (each) may be displayed.
Warning Signs And Safety Sign Requirement
Warning signs and safety signs: Warning signs and safety signs, not exceeding four square feet in sign area, shall be allowed in all districts.
Need the full sign-code report?
The full interactive report includes all sign types, illumination rules, permit requirements, and source citations — for free.