Every outdoor sign in Eatonville is governed by the municipality’s sign ordinance, which sets how large a sign may be, how tall it may stand, how far it must sit from the property line, whether it may be illuminated, and which sign types are permitted in each zoning district. This page summarizes those requirements in plain language and links each value back to the section of the Eatonville code it came from.
Sign rules here are layered. The base zoning district — commercial, industrial, or residential — sets the default limits, and overlay districts such as historic or downtown districts can tighten them further. Because the most specific jurisdiction controls, a freestanding monument sign on a commercial parcel and a wall sign in a historic overlay can face very different limits even on the same street in Eatonville.
Use the figures below as a fast first check, then run a full address lookup to confirm the exact limits for a specific parcel in Eatonville, Florida. The full report also covers permit requirements, prohibited sign types, and illumination rules — each cited to the source ordinance so your permit application can reference it directly.
Before you order or install a sign in Eatonville, confirm three things: the maximum sign area and height allowed in the parcel’s zoning district, the minimum setback from the right-of-way, and whether the sign type you want — freestanding, monument, wall, projecting, or awning — is permitted there at all. Many permit denials come from missing a setback or an overlay-district restriction rather than from the size of the sign itself, so checking the governing section before applying saves a costly resubmittal.
Advertisement
Advertisement
Max ground sign height
Monument: Not specified; Pylon: Not specified
Ground sign setback
10 ft from front or street-side lot line
Building Signs
Building Sign Formula
One sign per lot or main building; one sq ft per linear ft of frontage for shopping centers
Building Sign Max Number
One sign per lot or main building; one sign per artisan
5 sq ft for off-site directional information sign for institutions
General Info
Jurisdiction Name
Eatonville, FL
General Standards
Max Signs Per Property
No more than one sign is placed upon any property unless such property fronts upon more than one street, in which event one such sign may be erected on each frontage
Sign Classification
Signs and lettering shall be classified as signs regardless of whether they are free standing or attached or painted or projects from or on a principal or accessory structure
Notice required within 48 hours of unlawful sign; otherwise, sign is subject to removal by the town
Retrieval Period For Removed Sign
Sign may be retrieved within 30 days of removal; otherwise, it will be disposed of by the town
Prohibited Signs
Billboards Prohibition
Billboards: New billboards (also known as off-premises signs that direct attention to a business service, commodity, entertainment, or attraction sold offered or existing elsewhere than upon the same lot where such sign is displayed) shall be prohibited within the town limits.
Temporary Signs
Temp Signs Allowed
Permit required
Temp Sign Rules
Max area: 10 sq ft; Max height: 6 ft; Max duration: Not specified; Permit: Required
No business sign in a nonresidential district shall project more than four feet from the main wall of a building or shall any business sign project into a public way.
Need the full sign-code report?
The full interactive report includes all sign types, illumination rules, permit requirements, and source citations — for free.