Understanding sign regulations in Daytona Beach, FL
Every outdoor sign in Daytona Beach is governed by the municipality’s sign ordinance, which sets how large a sign may be, how tall it may stand, how far it must sit from the property line, whether it may be illuminated, and which sign types are permitted in each zoning district. This page summarizes those requirements in plain language and links each value back to the section of the Daytona Beach code it came from.
Sign rules here are layered. The base zoning district — commercial, industrial, or residential — sets the default limits, and overlay districts such as historic or downtown districts can tighten them further. Because the most specific jurisdiction controls, a freestanding monument sign on a commercial parcel and a wall sign in a historic overlay can face very different limits even on the same street in Daytona Beach.
Use the figures below as a fast first check, then run a full address lookup to confirm the exact limits for a specific parcel in Daytona Beach, Florida. The full report also covers permit requirements, prohibited sign types, and illumination rules — each cited to the source ordinance so your permit application can reference it directly.
Before you order or install a sign in Daytona Beach, confirm three things: the maximum sign area and height allowed in the parcel’s zoning district, the minimum setback from the right-of-way, and whether the sign type you want — freestanding, monument, wall, projecting, or awning — is permitted there at all. Many permit denials come from missing a setback or an overlay-district restriction rather than from the size of the sign itself, so checking the governing section before applying saves a costly resubmittal.
Advertisement
Advertisement
Max ground sign height
Development providing 1 sustainable development practice from Schedule A and 3 from Schedule B: Up to 10% increase in maximum height for freestanding signs
Awning Signs
Awning Projection Clearance
6 ft max projection
Building Signs
Building Sign Formula
Board may approve wall signs: In the RDB-1 district, the Redevelopment Board may approve wall signs in mixed-use development with a sign area that exceeds the above maximum sign area standards, and may approve additional signs for accessory uses, provided: (a) Every sign shall have appropriate scale and proportion in its design and in its visual relationship to buildings and surroundings.
Roof Mounted Sign Max Height
roof-mounted sign system: Roof-mounted sign system shall not extend more than 15 feet above the roofline of structure on which mounted
Canopy: No internal illumination; exterior lighting must be shielded/recessed
Lighting Plan Requirement
Lighting Plan: To ensure compliance with the standards of this section, a lighting plan demonstrating how exterior lighting will comply with the standards of this section shall be included as part of any application included in 6.
Advertisement
Advertisement
Permit Process
Sign Permit Renewal Period
Sign Permits are subject to annual renewal.
Sign Plan Requirements
A to-scale site plan must show the location of all signs to be established or maintained on the site
Prohibited Signs
Awning Sign Prohibited Content
Canopy covering fuel pumps: No other signage or advertising except as authorized by Section 6.10, Signage
Prohibited Location
All areas except redevelopment areas: Prohibited except within 100 feet of I-95 right-of-way
A variance cannot increase the number of a particular type of sign beyond that allowed by signage standards or allow a prohibited sign
Zoning
Zoning District Frontage Requirement
RDB-2 districts; zones RDB-2: 25 ft frontage required, 8 ft in RDB-2 districts
Number Of Signs Allowed Quantity Limit
The number of signs permitted for any use or parcel shall be determined by reference to the sign schedule for the district in which the parcel is located.
Need the full sign-code report?
The full interactive report includes all sign types, illumination rules, permit requirements, and source citations — for free.