Every outdoor sign in Center Hill is governed by the municipality’s sign ordinance, which sets how large a sign may be, how tall it may stand, how far it must sit from the property line, whether it may be illuminated, and which sign types are permitted in each zoning district. This page summarizes those requirements in plain language and links each value back to the section of the Center Hill code it came from.
Sign rules here are layered. The base zoning district — commercial, industrial, or residential — sets the default limits, and overlay districts such as historic or downtown districts can tighten them further. Because the most specific jurisdiction controls, a freestanding monument sign on a commercial parcel and a wall sign in a historic overlay can face very different limits even on the same street in Center Hill.
Use the figures below as a fast first check, then run a full address lookup to confirm the exact limits for a specific parcel in Center Hill, Florida. The full report also covers permit requirements, prohibited sign types, and illumination rules — each cited to the source ordinance so your permit application can reference it directly.
Before you order or install a sign in Center Hill, confirm three things: the maximum sign area and height allowed in the parcel’s zoning district, the minimum setback from the right-of-way, and whether the sign type you want — freestanding, monument, wall, projecting, or awning — is permitted there at all. Many permit denials come from missing a setback or an overlay-district restriction rather than from the size of the sign itself, so checking the governing section before applying saves a costly resubmittal.
Advertisement
Advertisement
Max ground sign height
Monument: 8 ft; Pylon: 25 ft
Ground sign setback
Monument: 10 ft from side and rear property lines; Pylon: 15 ft from public road right-of-way line
Building Signs
Building Sign Formula
Aggregate maximum allowable area = linear footage of all public road frontages of the subject parcel OR 50 square feet, whichever is greater. This is a general rule applying to all sign types including building signs.
Building Sign Setback
Building signs shall meet the same setback requirements as ground signs
A sign of any size or shape which is placed on (above-ground) or in (anchored below ground) property owned by the board, including right-of-way as defined herein, which represents, advertises, or promotes any private business, commercial activity, political candidate, political position, or nonprofit organization, or which promotes any event related to the foregoing.
Ground Sign Definition
Ground signs; zones CH, CR: A permanent ground sign, and any part of its supporting structure, shall be designed and located as follows: a) Height is limited to 35 feet for on-site ground signs, unless within the CH or CR zoning districts.
General Info
Jurisdiction Name
Center Hill, FL
General Standards
Permitted Sign Setback Requirement
Permitted signs: Unless expressly prohibited herein, all signs are permitted by this division, subject to the setback provisions of section 13-591.
Sign Illumination And Signs Containing Lights Allowance
Unless otherwise prohibited by this section, signs may be illuminated if such lighting directed toward a sign is shielded so that it illuminates only the face of the sign and does not shine directly into a public right-of-way, so as to cause glare and impair vision, or residential premises.
Temporary Signs
Temp Signs Allowed
Permit required
Temp Sign Rules
Max area: 100 sq ft; Max height: 35 ft; Max duration: 30 days; Permit required
Need the full sign-code report?
The full interactive report includes all sign types, illumination rules, permit requirements, and source citations — for free.