Every outdoor sign in Belleview is governed by the municipality’s sign ordinance, which sets how large a sign may be, how tall it may stand, how far it must sit from the property line, whether it may be illuminated, and which sign types are permitted in each zoning district. This page summarizes those requirements in plain language and links each value back to the section of the Belleview code it came from.
Sign rules here are layered. The base zoning district — commercial, industrial, or residential — sets the default limits, and overlay districts such as historic or downtown districts can tighten them further. Because the most specific jurisdiction controls, a freestanding monument sign on a commercial parcel and a wall sign in a historic overlay can face very different limits even on the same street in Belleview.
Use the figures below as a fast first check, then run a full address lookup to confirm the exact limits for a specific parcel in Belleview, Florida. The full report also covers permit requirements, prohibited sign types, and illumination rules — each cited to the source ordinance so your permit application can reference it directly.
Before you order or install a sign in Belleview, confirm three things: the maximum sign area and height allowed in the parcel’s zoning district, the minimum setback from the right-of-way, and whether the sign type you want — freestanding, monument, wall, projecting, or awning — is permitted there at all. Many permit denials come from missing a setback or an overlay-district restriction rather than from the size of the sign itself, so checking the governing section before applying saves a costly resubmittal.
Census snapshot
Population
5,438
Median household income
$49,007
Median home value
$160,000
County
Marion
Time zone
Eastern Time
Demographic figures are from the U.S. Census Bureau (American Community Survey) and are provided as jurisdiction context for Belleview; they do not affect sign-code requirements.
Advertisement
Advertisement
Max ground sign height
Monument: 25 ft; Pylon: 25 ft
Awning Signs
Awning Projection Clearance
seven feet
Building Signs
Building Sign Formula
2 sq ft per linear ft of unit/main entrance frontage for each tenant unit
Drive Through Lane Sign Max Height
drive-through lane: Top of the sign and its surrounding or supporting framing/structure shall not exceed nine feet above ground level
a sign either with or without frames, possessing characters, letters, illustrations or ornamentations applied to cloth, paper or fabric of any kind.
Pennant Definition
any flag-like piece of cloth, plastic, or paper attached to any staff, cord, building or other structure that hangs loosely (feather flag) for the purpose of attracting attention to the site.
Change in principal use of premises requires removal of legally nonconforming sign and replacement with a conforming sign
Sign Maintenance Requirements
All signs shall be thoroughly painted as necessary to maintain the sign or sign structure in good working condition, unless made of galvanized or non-corroding material
Sign Structure Exposure Extension
in full report
Sign Structure Exposure Limit
in full report
Double Faced Billboards Requirement
in full report
Maximum Sign Area Maximum Area
in full report
Street Address Signs And Residential Mailboxes Allowance
Application must include site drawing with vertical depiction, height, size, stress/wind load, distance from property lines, other signs, zoning designation, and compliance with building code
Sign Permit Required
All signs require a sign permit unless otherwise specified
Identification Of Billboard Sign Permit Requirement
No portion of any billboard shall be erected or maintained within 20 feet of any property line
Billboard Proximity To Residential District
No billboard structure shall be erected within 50 feet of the nearest residential zoning district, measured from closest point of billboard structure to closest residential zoning district boundary
Temporary Signs
Temp Signs Allowed
Yes, temporary signs allowed with permit required
Temp Sign Rules
Max area: 15 sq ft; max height: 25 ft; max duration: 45 days/year; permit required
General Rule Concerning Temporary Sign Removal Requirement
Temporary window signs: For each commercially zoned or commercially used parcel within the City, one or more temporary window signs may be displayed on the inside of the window.
Zoning
The Sign Requirement
The sign: The sign standards for nonconforming or permitted residential uses of property, lying within nonresidential districts, shall be determined by the zoning classification of the property, not the actual usage.
Warning Signs And Safety Sign Requirement
Warning signs and safety signs: Warning signs and safety signs, not exceeding four square feet in sign area, shall be allowed in all districts.
Need the full sign-code report?
The full interactive report includes all sign types, illumination rules, permit requirements, and source citations — for free.