Every outdoor sign in Auburndale is governed by the municipality’s sign ordinance, which sets how large a sign may be, how tall it may stand, how far it must sit from the property line, whether it may be illuminated, and which sign types are permitted in each zoning district. This page summarizes those requirements in plain language and links each value back to the section of the Auburndale code it came from.
Sign rules here are layered. The base zoning district — commercial, industrial, or residential — sets the default limits, and overlay districts such as historic or downtown districts can tighten them further. Because the most specific jurisdiction controls, a freestanding monument sign on a commercial parcel and a wall sign in a historic overlay can face very different limits even on the same street in Auburndale.
Use the figures below as a fast first check, then run a full address lookup to confirm the exact limits for a specific parcel in Auburndale, Florida. The full report also covers permit requirements, prohibited sign types, and illumination rules — each cited to the source ordinance so your permit application can reference it directly.
Before you order or install a sign in Auburndale, confirm three things: the maximum sign area and height allowed in the parcel’s zoning district, the minimum setback from the right-of-way, and whether the sign type you want — freestanding, monument, wall, projecting, or awning — is permitted there at all. Many permit denials come from missing a setback or an overlay-district restriction rather than from the size of the sign itself, so checking the governing section before applying saves a costly resubmittal.
Advertisement
Advertisement
Ground sign setback
5' back from property line; 25' entrance/exit/corner triangulation
Awning Signs
Awning Sign Sf Calc
Entire awning counts toward SF (wall sign calculation applies)
Awning Projection Clearance
8' off grade, 3' off the wall; if landlord allows
Building Signs
Building Sign Formula
One wall sign not exceeding 20 sq ft for each 10 lineal ft of building frontage identified on Business Tax Receipt; second wall sign of same formula allowed if a second wall fronts a different public right-of-way; signs may not extend more than 3 ft above roof or beyond building sides. Two to one ratio.