Every outdoor sign in Parker is governed by the municipality’s sign ordinance, which sets how large a sign may be, how tall it may stand, how far it must sit from the property line, whether it may be illuminated, and which sign types are permitted in each zoning district. This page summarizes those requirements in plain language and links each value back to the section of the Parker code it came from.
Sign rules here are layered. The base zoning district — commercial, industrial, or residential — sets the default limits, and overlay districts such as historic or downtown districts can tighten them further. Because the most specific jurisdiction controls, a freestanding monument sign on a commercial parcel and a wall sign in a historic overlay can face very different limits even on the same street in Parker.
Use the figures below as a fast first check, then run a full address lookup to confirm the exact limits for a specific parcel in Parker, Colorado. The full report also covers permit requirements, prohibited sign types, and illumination rules — each cited to the source ordinance so your permit application can reference it directly.
Before you order or install a sign in Parker, confirm three things: the maximum sign area and height allowed in the parcel’s zoning district, the minimum setback from the right-of-way, and whether the sign type you want — freestanding, monument, wall, projecting, or awning — is permitted there at all. Many permit denials come from missing a setback or an overlay-district restriction rather than from the size of the sign itself, so checking the governing section before applying saves a costly resubmittal.
Advertisement
Advertisement
Building Signs
Building Sign Formula
Under 75 ft frontage: 1 sf per linear foot of public frontage after subtracting 30 ft, plus 30 sf; over 75 ft frontage: 1 sf per 2.5 linear feet after subtracting 75 ft, plus 75 sf; by lease area: 1 sf per 200 sf after subtracting 900 sf, plus 30 sf minimum; no more than 150 sf per side and 450 sf total.
Permits
Permit Required
Source-backed sign permit requirement: ["Wall Sign Permit Checklist Form\n Complete Application including:\n - Property Owner/Management Company Approval\n - Type and style of sign\n - Sign mounting description\n - Value of the sign\n - Will a temporary banner be needed?\n - Is the sign associated with a new building or project?\n - Will there be any underground work or electrical alteration?\n\n Sign Detail Sheet(s) that include:\n - Graphics of the sign
Permit Required 2
Source-backed sign permit requirement: 3. Building area calculation\n Building lease area ______\n Less 900 s.f. - 900\n Remainder = ______\n 1 s.f. for each 200 s.f. of area ÷ 200\n Result = ______\n Add 30 s.f. + 30\n Total wall sign area = ______\n * All businesses are permitted a minimum of thirty (30) s.f. of wall sign area\n\f 2011 NEC Electric Signs & Outline Lighting\n (What you need to know to get a sign permit and pass inspection)\n\n1. Section
Source-backed master/planned sign program: ea are calculated in one of two ways; either by building elevation linear footage (1\nor 2) or building lease area (3), whichever allows for the greatest amount of sign square footage, not to exceed 150\ns.f. per side and 450 s.f. in total area. If there is a Planned Sign Program (PSP) in effect for your property, use the\napproved signage calculations of the approved PSP, not this worksheet. Otherwise, use the appro
Advertisement
Advertisement
Temporary
Temporary Signs
Source-backed temporary sign rules: s and\nconditions to proceed.\n\nComplete the Permit Type Information section as follows:\n\n\n\n\n Enter the value of\n the job here\n\n\n\nProceed to fill out the additional information section. In this section, you will enter the details for\neach of the wall signs. Please enter numbers only into the weight, height and square footage\nfields (no lbs., ft., etc.).\n\fThe Additional Information section should be f
Temporary Signs 2
Source-backed temporary sign rules: ht, height and square footage\nfields (no lbs., ft., etc.).\n\fThe Additional Information section should be filled out as follows:", "e\n\n\n\nProceed to fill out the additional information section. In this section, you will enter the details for\neach of the wall signs. Please enter numbers only into the weight, height and square footage\nfields (no lbs., ft., etc.).\n\fThe Additional Information section should be f
Source-backed wall sign rules: he screen and the permit will show up under active\npermits.\nThe permit will now be reviewed by Town staff and you will receive an email when the permit\nhas been approved. Once you receive the email please log back in to TRAKiT and pay for your\npermit.\n\f WALL SIGN AREA CALCULATION SHEET\nWall sign and projecting sign area are calculated in one of two ways; either by building elevation linear footage (1\nor 2) or
Wall Signs 2
Source-backed wall sign rules: ve\npermits.\nThe permit will now be reviewed by Town staff and you will receive an email when the permit\nhas been approved. Once you receive the email please log back in to TRAKiT and pay for your\npermit.\n\f WALL SIGN AREA CALCULATION SHEET\nWall sign and projecting sign area are calculated in one of two ways; either by building elevation linear footage (1\nor 2) or building lease area (3), whichever allows for t