Every outdoor sign in Arkadelphia is governed by the municipality’s sign ordinance, which sets how large a sign may be, how tall it may stand, how far it must sit from the property line, whether it may be illuminated, and which sign types are permitted in each zoning district. This page summarizes those requirements in plain language and links each value back to the section of the Arkadelphia code it came from.
Sign rules here are layered. The base zoning district — commercial, industrial, or residential — sets the default limits, and overlay districts such as historic or downtown districts can tighten them further. Because the most specific jurisdiction controls, a freestanding monument sign on a commercial parcel and a wall sign in a historic overlay can face very different limits even on the same street in Arkadelphia.
Use the figures below as a fast first check, then run a full address lookup to confirm the exact limits for a specific parcel in Arkadelphia, Arkansas. The full report also covers permit requirements, prohibited sign types, and illumination rules — each cited to the source ordinance so your permit application can reference it directly.
Before you order or install a sign in Arkadelphia, confirm three things: the maximum sign area and height allowed in the parcel’s zoning district, the minimum setback from the right-of-way, and whether the sign type you want — freestanding, monument, wall, projecting, or awning — is permitted there at all. Many permit denials come from missing a setback or an overlay-district restriction rather than from the size of the sign itself, so checking the governing section before applying saves a costly resubmittal.
Advertisement
Advertisement
Max ground sign height
30 ft max height, up to 50 ft within 300 ft of I-30
Ground sign setback
10 feet from property lines or projected right-of-way lines; freestanding signs also 10 feet from adjoining property lines and the front property line or street right-of-way line
Building Signs
Building Sign Illumination
Neon signs: Signs which utilize neon lighting, either for the body of the sign or its border, shall comply with all relevant local, State and Federal electrical requirements.
Building Sign Formula
15% of wall area, capped at 200 sq ft
Definitions
Temporary Sign Definition
Temporary signs: Temporary signs are portable and intended for impermanent use for a limited or specified time period.
Advertising Sign Or Structure Definition
Any cloth, card, paper, metal, glass, wooden, plastic, plaster, stone sign or other sign, device, or structure of any character whatsoever, including a statuary, placed for outdoor advertising purposes on the ground or on any tree, wall, bush, rock, post, fence, building, or structure.
Advertising Sign Definition
in full report
Advertising Structure Area Measurement
in full report
Sign Pole Definition
in full report
Sign Portable Definition
in full report
Sign Definition
in full report
Billboard Definition
in full report
Certain Attached And Painted Sign Definition
in full report
Outdoor Advertising Signs And Structures Definition
Neon signs: Signs which utilize neon lighting, either for the body of the sign or its border, shall comply with all relevant local, State and Federal electrical requirements.
General Standards
Sign Maintenance Standard
Signs must be constructed of durable materials, maintained in good condition, and not be dilapidated.
Advertisement
Advertisement
Ground Signs
Ground Sign Type
Ground-mounted
Ground Sign Formula
Each single-tenant structure is allowed freestanding signs provided that the display surface of such signs shall not exceed eighty (80) square feet except that the display surface may be increased two (2) square feet for each foot of street frontage beyond one hundred (100) feet to a maximum display area of one hundred twenty (120) square feet.
Ground Sign Max Height
in full report
Freestanding Signs For Single Tenant Structures Maximum Area
Temporary signs advertising garage or yard sales may not exceed 6 sq ft and must be removed within 24 hours after the sale
Temporary Subdivision Sign Allowance
Temporary subdivision signs: Temporary signs not exceeding thirty-two (32) square feet in area announcing a land subdivision development are permitted on the premises of the land subdivision.
Real estate signs; zones residential: In any residential zone, real estate signs may not be larger than nine (9) square feet in size and only one (1) sign is allowed for each side of the structure that faces a public street.
Need the full sign-code report?
The full interactive report includes all sign types, illumination rules, permit requirements, and source citations — for free.